No products in the cart.

  • Home
  • Posts Tagged "electrical supplies wholesalers"

Maintenance of Electrical Plant and Tools

Posted on January 22, 2018 By In Uncategorized With no comments

Electricity can kill. Each year about 1000 accidents at work involving electric shock or burns are reported to the Health and Safety Executive (HSE). Even non-fatal shocks can cause severe and permanent injury. Shocks from faulty equipment may lead to falls from ladders, scaffolds or other work platforms.

Those using electricity may not be the only ones at risk: poor electrical installations and faulty electrical appliances can lead to fires, which may also cause death or injury to others.

In view of the risks from damaged or faulty electrical equipment, an appropriate maintenance system should be set up. It is also important that equipment is regularly serviced in accordance with manufacturers’ instructions.

Users should carry visual checks out daily and competent persons should carry out formal inspections at regular intervals.

These checks and inspections should ensure that::

• bare wires are not visible;

• the cable covering is not damaged;

• the plug is in good condition;

• there are no taped or other non-standard joints in the cable;

• the cable covering is gripped where it enters the plug or equipment;

• the outer casing of the equipment is not damaged or loose;

• there are no signs of overheating on the plug, cable or equipment; and

• Residual Current Devices (RCDs) are working correctly (the test button should be pressed daily).

Testing, by a competent person, can detect faults such as loss of earth continuity, deterioration of the insulation and internal or external contamination by dust, water, etc. The Building Safety Group can provide more information on working with electricity safely.



Source by Rob Phillips

Great Father of the Groom Toasts For the Rehearsal Dinner

Posted on January 22, 2018 By In Uncategorized With no comments

Traditionally the bride’s parents paid for the wedding ceremony and the groom’s parents hosted the rehearsal dinner. If that’s how your son’s wedding is arranged, you may find yourself needing to open the dinner with a toast. While it may make you nervous, remember that we often don’t hear lots about the groom at the wedding. So, it’s a great gift for you to talk about this wonderful man who is your son. So, what to say that’s enough and not too much? There are a lot of suggestions here, but you want to keep your toast fairly short: the wait staff is waiting to serve and people are hungry. This is often the meal that will start people getting acclimated to the right time zone for the wedding.

Welcome everyone to the meal and the start of this great celebration.

  • Your family may not have gathered for a while, so it’s nice to be together again.
  • Offer a particular welcome to the bride’s family and look forward to getting to know one another better through the years.
  • Welcome all the family friends on both sides who have traveled to witness this wonderful occasion.
  • And then say hello to all the friends of the bride and groom who have gathered to celebrate their friends.

Say how happy you are that your son has chosen to marry such a wonderful woman.

  • Talk a little bit about the wonderful qualities you’ve noticed in your son’s fiancée.
  • Tell them that you’re looking forward to her becoming a member of your family.

Tell them how wonderful your son is and how proud you and his mother are of your son.

  • It’s OK to talk just one of your children, because this event is just about him.
  • It’s a wonderful time to tell your son that you’re proud to be his parents.

Say how much you’re looking forward to the entire weekend, their happy marriage and the shared years ahead of you. Hoist your glass, and sit down and enjoy the dinner and your friends, both old and new.

Note: if you and your son’s mother are divorced, it’s still really important to acknowledge that the two of you brought this wonderful man into the world. There’s nothing odder than parents pretending that they have no past together despite fabulous children. At some point the two of you loved one another enough to create this great son. Your ex was there when this child was brought into the world. You can afford to be generous and you might even allow the wedding to move you into a place of greater peace with one another. After all, there may be grandchildren ahead; no one wants to miss birthdays because you can’t figure out how to talk to one another. You don’t lose anything, ever by being generous. Your new spouses need to figure this out too, because they benefit from peace as well. And it will make all your children sigh with relief as you acknowledge the reality of the family they grew up in.



Source by Ann Keeler Evans

Knowing the Difference Between Distributors, Wholesalers, and Retailers

Posted on January 22, 2018 By In Uncategorized With no comments

Obtaining the required merchandise involves using a variety of distribution sources. An effective marketing channel includes several middlemen between the consumer and manufacturer. This can include the wholesaler, distributor and retailer. Here are several of the key differences related to the services involved in the retail supply chain:

Distributor

A well-established distributor is able to build-up a solid relationship with the major manufacturers. Distributors have the responsibility of acting as the main point of contact for the manufacturer. This means the buyer goes direct to the distributor and not to the manufacturer when looking to purchase the goods. Many of the distributors have exclusive agreements with the manufacturers. This can limit the number of companies involved in trading a certain product. A distributor isn’t likely to get involved in selling the goods direct to the end consumer. They are mainly involved in dealing with the large retailers or wholesale representatives who are searching for the latest merchandise to stock in store.

Wholesaler

A wholesaler is involved in trades that concern buying large volumes of goods direct from the distributors that are acting on behalf of the manufacturer. Buying the supplies in high volume is certain to help with improving the buying potential for the wholesaler. A distributor can give certain discounts on merchandise purchased at higher volumes. A wholesaler is the perfect source for all-types of merchandise, such as furniture, televisions, clothing, bicycles, auto parts, computers, telephones, etc. These supplies are intended to be sold to retailers who resell to the general public.

Retailer

A retailer consists of the large and small businesses that market the merchandise to the end consumer. A retailer uses the wholesale supplier offering the most competitive prices in the market to help generate the profit. Retailers purchase stock from the wholesaler or distributor in smaller quantities. Minimum order volume can vary with the different suppliers, so it is necessary for the retailer to shop around in hope of gaining the best deals in relation to order volume and pricing. Minimum order limits may range from 25 to 100 units, so it certainly benefits to try several different wholesalers until the store gets the most practical deal.

All in all, by taking advantage of the established business relationships, communication skills and market research, the retailers, distributors and wholesalers are able to get in the right position to create the most beneficial trading strategies to achieve success in this very competitive industry.



Source by Sunil Keshari

McCulloch Chain Saw Parts – Replace Or Repair?

Posted on January 22, 2018 By In Uncategorized With no comments

Many people might not have a need for a chainsaw. They might be able to get away with doing light trimming, mowing, and edging to keep their lawns looking beautiful. But there can come a time that a home owner needs something a little bigger, and a little more powerful. If you have to remove a tree, a stump, a bush, or any other large plant from your yard, you might want to get a chain saw.

If you make this decision, you are going to want to buy something that is durable. Some of the most durable chain saws that are on the market today are made from McCulloch chain saw parts. If you buy a saw made from McCulloch chain saw parts, you wont be likely to ever have to replace them. But if, for some reason, your saw breaks down, you need to decide if it is worth the cost of repair, or if you should buy a new saw.

The makers of these saws have over 100 years of experience and they build some of the most reliable saws on the market today. So what do you do if you need new McCulloch chain saw parts? Do you replace your saw, or do you repair your saw?

If you have a McCulloch saw you aren’t going to have to repair it often. But if a part does go awry, you are probably better off repairing your saw than replacing it. Here are a few reasons why.

First, McCulloch offers a warranty on almost all of their saws and parts. They are a company that prides themselves on their products, but also on their customer service. If you have a saw that is under warranty, you might be able to get your McCulloch chain saw parts for free or at a discounted price.

If you do not have a warranty, or if your warranty has expired, you can by McCulloch chain saw parts at very affordable prices. There are many stores on the internet that can offer you these parts, but you can also buy direct from McCulloch. You can find filters, caps, oils, chains and other chain saw parts to get your saw back up and running

If there is a McCulloch dealership near you, you might even be able to get them to fix your saw for you. If it is a big repair, like an engine repair, you are probably better off using a professional instead of trying to do the repairs yourself. Small engine mechanics are also another way that you can get help for your engine repairs.

But before you go out and by some parts to fix your chain saw, you need to check out the current line of McCulloch saws. They are constantly evolving to the higher demands of companies and people. Their technology may have improved since the last time you bought a saw.

Buying a new chain saw probably isn’t necessary if you are dealing with a McCulloch product. But you might find the saw of your dreams when you view the current product line.



Source by Steve Killgore

The Chastity Cage – And Why Your Man Will Beg to Wear One

Posted on January 22, 2018 By In Uncategorized With no comments

A chastity cage is something many, many men will beg to wear for their wives and girlfriends… and then beg them to take the key, leaving them unable to orgasm with you, by themselves or with another… unless… and until… and only IF you ever… give your permission.

But what is a…

Chastity Cage

Chastity cages are typically exactly the name suggests: a more-or-less penis-shaped cage, made form plastic or metal, that completely encloses his penis so he can’t stimulate it enough to have an orgasm. Unlike a chastity belt, a cage is usually held in place by a ring that goes around the scrotum and base of the penis behind the testicles themselves.

Yes, it sounds awful but I have it on good authority they can be very comfortable and can be worn 24/7. And I trust my source… because… it’s my husband, and he’s locked 24/7 and is in the process of enduring a whole year of strict orgasm denial while locked in his chastity cage (he has consented to this and is perfectly happy with the arrangement).

But why? What makes a man want to give up such an essential part of his sexuality to you?

Well, contrary to popular belief your man does not have to be strange or submissive to want to wear a chastity cage for you. The reasons are complex and come down partly to biology (the repeated tease and denial and the long-term wanting to come are the closest he’s ever going to get to a multiple orgasm); and partly to psychology (there’s a thrill in power-exchange for many men… and for many of us women, too, once we realise it’s just harmless fun and nothing to be afraid of).

You’ll find your man wearing a chastity cage will make him more loving and communicative, and more willing to help around the house. And he’ll do this not because he’s necessarily feeling submissive, but because his feelings will make him close to you, and people who are close like to do nice things for each other, don’t they?

The bottom line is men love to wear a chastity cage, and any man who is wearing one is doing so only because he wants to. The stories you read about men being ‘forced’ to wear then are just that – stories.

And if you’re looking for reliable, serious and genuine information about male chastity cages and you are SICK and TIRED of the nonsense and bare-faced LIES people tell about being ‘forced’ to do it, then it makes sense to listen to someone who’s living the lifestyle 24/7, doesn’t it?



Source by Sarah Jameson

Transformer Manufacturer

Posted on January 22, 2018 By In Uncategorized With no comments

Transformer Manufactures are companies that manufacture and supply power distribution transformers. This may include highly efficient amorphous metal core transformers, package substations, battery chargers, switchgear and associated electrical equipment.

Many of these companies will assess any specific individual power requirements and aim to supply cost effective and reliable power solutions that work for the customer and the environment. The equipment they supply can be new manufactured gear or re-engineered gear and will come with leading industry guarantees.

There are many different types of transformers which are used for a wide range of applications, and some of these are:

o Super low amorphous transformers

o Substations

o Switchgear

o Battery chargers

o Voltage optimization

o Toroidal transformers

o Step up / Step down transformers

o Tool and Site transformers

Step up & step down auto transformers are small in size and weight and can be easily installed into existing equipment or supplied in an enclosure with or without plug, cord and receiver.

Tool and site transformers are used for power tools, machinery and lighting applications on building sites; housed in reinforced fiberglass they provide durability and security. Tool and site transformers are usually 110v, 230v, and 415v and all conform to the strictest safety standards.

For outdoor use waterproof transformers are essential and will generally have an input of 230v and an output of 12v to 24v. These types of transformers are commonly used for outdoor lighting and powering garden pond pumps.

Transformers are devices that transfer electrical energy from one circuit to another circuit. This is achieved by passing the electricity through the transformers coils; These coils are referred to as inductively coupled inductors. Most transformers have the coils wound around a ferromagnetic core.

Transformers can be manufactured in a wide range of sizes. They can be small enough to fit into a microphone, or they may be extremely large units that weigh hundreds of tons and used to interconnect national power grids.

Although the range of designs and sizes may vary strongly, they all work by the same basic principles.



Source by John Cheesman

Conversion to Electric Car – Finding Cheap Parts

Posted on January 22, 2018 By In Uncategorized With no comments

Converting your car to electric will become a breeze with the right parts. Parts that fit will make sure that you have smooth running and use of your electric car. When it comes to automobiles, you may want to avoid paying so much for parts. You would want to buy parts that are affordable so that in the end you incur less expense on your car.

One way to get your car converted to electric at a cheap price is to look for affordable parts. You can buy these in the form of kits or individual components. Whichever form the purchase takes, you would want to look to suppliers that will offer the lowest prices.

You may begin your search via the web. You would want to start with manufacturers that are offering original parts.

Whist at these sites, you would want to use the left pane to navigate through the site to find the lowest range in every category.

Another way to obtain cheap electric car parts is to look at eBay. Here you will conduct a search under auto parts and the filter down the results according to price. You can show the least price first.

In all these methods, you would be careful to buy from companies or individuals that will guarantee the quality of the products and offer you a warranty. If buying from eBay, you may want to look at the sellers feedback to see if there are any

You would be very careful with the purchase of the controller. It is the device that controls the flow of power from the batteries to the motor. If you buy the wrong type you may be able to get your full acceleration and then underutilize the energy of the electric car.



Source by John Bigman

What Are the Fees for Electrician Service?

Posted on January 22, 2018 By In Uncategorized With no comments

Electrical malfunctions in your home can be quite stressful and fees for electrician service often compound the problem. How do you know what rates are fair and whether the electrician is qualified to do the work? Obtaining quotes from licensed professionals only is important, as well as understanding all of the factors involved in established fees.

Pricing Factors

While an Atlanta electrician service fee may differ from a bit from someone licensed for the work in another state, quotes are based on several common factors – the type of electrical work you need and the conditions of the job. Replacing old, faulty aluminum wiring in a house may cost more than wiring an entire house during new construction. Precarious conditions such as heights or crawling through small spaces under a house can affect the cost of a project too.

If your electrical project is an emergency that requires a quick response time, rates can rise as can after-hours work on weekends and evenings. When special equipment and tools are necessary to complete a job, rates can be higher as well. Travel distance can affect fees for electrician service too, so it is important to ask specifically about this when requesting a quote. Electrical contractors may not charge travel expenses if the job is within a specified distance of their business headquarters.

Other Factors to Keep in Mind

It is important to get at least three quotes from different electrician professionals for a decent rate comparison. The lowest price is not always the best way to go as the person doing the work may not be licensed or heavily experienced. You could end up paying more far if you have to hire a second contractor to fix what the cheaper electrician did.

Always ask for proof of professional licensing and do not hesitate to check with your state's governing board for verification, as some people can and will lie about their experience. Keep in mind that the higher the skill level and years of experience, the higher the electrician service fees. You should view this as a good thing as electrical contractors must take continuing education courses each year to keep their license active and valid, which means a safer situation all around.

Another thing to keep in mind when comparing electrician quotes is the time of year the work is to be done. Colder weather is often more difficult and presents additional hazardous situations than warm weather, so electrical work could garner a higher price. Of course, wind and rain during warm conditions can add to the overall price too. The need for an apprentice or other electrician's helper to complete the project is yet another issue to consider when reviewing rates from contractors.

As you can see, there are various aspects influencing fees for electrician service. So the next time you gather quotes for an electrical project, do not assume you are being gouged. Consider all the factors that go into creating those quotes and remember – it is much safer to hire a licensed professional than trying to do the job yourself.



Source by Terrell McCall

HHO Cell – Use Water As Fuel

Posted on January 22, 2018 By In Uncategorized With no comments

HHO Cell – how it works?

It is based on simple electrolysis which splits water into molecules of hydrogen and oxygen. It produces free floating molecules of hydrogen and oxygen that both come out as gas.

HHO Fuel Cell is very similar to a conventional battery; it has an anode and a cathode separated by a membrane. Hydrogen flows over the cells anode which converts hydrogen into charged electrons and ions. The negatively charged electrons which flow out of the cell can then be used as electric energy. The positively charged hydrogen ions pass through the membrane to the cathode and combine with oxygen to produce water.

HHO Fuel Cell differs from a conventional battery in that they need a type of fuel from an external source that consistently needs to be replenished. This is known as a Thermodynamically Open System. Conventional batteries store electrical energy through chemical reactions and represent a Thermodynamically Closed system.

History of HHO Cell

Hard to believe, HHO cell was invented in the 19th century! In 1766. a British scientist Henry Cavendish discovered hydrogen or what he called "inflatable air". Same year, a Dutch scientist Martinus van Marum was conducting various experiments with electricity and created oxygen and hydrogen gas using electrolysis. He also discovered that the mixture could have been ignited by an electric spark.

In 1789 Paets van Troostwijk and Joan Rudolph Deiman discovered that water's elements are exactly 1 part oxygen and 2 parts hydrogen. They used electricity to split water and used a spark to combine the elements again in water.

Fifty years later Thomas Drummond discovered that illumination is created when an oxyhydrogen flame is directed at a cylinder of calcium oxide.

In 1860. Jean Joseph Etienne Lenoir built the first car that used electrolysis to produce hydrogen fuel. He was inventor from Ohio working with HHO from the 70's. Meyer created a very efficient, high-output electrolyzer cell for creating large amounts of HHO on demand. He applied that on Volkswagen-powered dune buggy vehicle and ran the engine on nothing but HHO

Then in 1918. Charles H. Frazer filed a patent for the first "Hydrogen Booster" system for internal combustion engines. He stated that his invention increases the efficiency, complete combustion of hydrocarbons, engine will stay cleaner and lower grade fuel can be used with equivalent performance. Then, in 1935. Inventor Henry Garrett patented a electrolytic carburetor and set it to run just on tap water.

During the late years of Second World War because of conventional fuel shortage the British army used oxyhydrogen gas generators to get better mileage and prevent engine overheating for vehicles used in Africa. Right after the war ended the government ordered to remove and destroy all generators from the vehicles.

Many years later. in1962. William A. Rhodes was the first inventor known to patent an electrolyser that produced the simple "single-ducted" gas we now call Brown's Gas. In the mid 1970's a German company produced oxyhydrogen generators. Ten years after William Rhodes patents, Yull Brown filed a patent on his design of a Brown's Gas electrolyzer.

In 1977. NASA Research Center conducted a series of tests. They were interested in what effects hydrogen had on the operation of the engine. The results were stunning. They also proposed an alternate method to produce the gas, which is more efficient than the usual electrolysis.

Today people often think that there are several different designs of HHO cells

Although there are some variations of the original design, all of them still operate on the same basic principle. Today, HHO cell consists of a water reservoir, electrolysis parts, tubing and wiring. Besides that, there is not much more when it comes to building your own HHO cell. You can also set it to run anytime the engine is running, but you can also wire it up with an on / off switch



Source by Milos Cirkovic

Build Your Own Solar Panel – 5 Easy Steps to Generate Your Own Electricity at Home

Posted on January 22, 2018 By In Uncategorized With no comments

Learn how to build your own solar panel by downloading PDF formatted instructions from do-it-yourself websites on the Internet. Fabricating and installing a series of energy producing solar panels free you from having to pay for conventional fossil fuel generated electricity each month. Because of its simplistic design, you can easily start small by building a simple single do-it-yourself solar power panel. Over time you can increase the dimensions of your solar power system to a size large enough to supply all the energy requirements of your home. Applying these five simple steps can make a dramatic positive change of living a greener lifestyle, by producing your own electricity each day.

Acquire the Necessary Information – Solar power PDF formatted information, instructions and guidelines can easily be found online, searching for "do-it-yourself solar power" or "DIY solar panels". Take the necessary time to understand thoroughly exactly how solar power systems work, what materials will be required and how to follow the schematic drawings.

Source All the Materials – Although the material list is minimal, you will need to purchase the materials required to build a simple container, along with wiring, which can be found at your local hardware store. Both simple and complex solar panels require a photovoltaic solar cell, the working part of the system that collects energy from the rays of the sun and converts into electricity. The photovoltaic cells can be purchased online, directly from the manufacturer, or at discounted prices at online auction houses including eBay.

Generate Your Own Power – Once you have a firm understanding of the construction process, and have acquainted all the necessary components, you can fabricate your first solar panel in just a few hours. The moment you have finished its construction, it will begin producing electricity, as long as it is in contact with the rays of the sun. A simple small photovoltaic solar panel can generate enough electricity to supply necessary energy to run a small appliance or light. By attaching a battery to the system, you can produce and store enough electricity to use the object after sundown.

Increase the Solar System Size – A large solar panel system, or whole house system, is nothing more than large group of small single solar panels connected in the series. The construction of a larger system may include batteries, or be connected directly to your local utility company. Batteries offer homeowners the freedom of generating electricity in locations where conventional fossil fuel electrical power is not provided. Alternately, connecting your system into the national electric grid, and using a reverse electric meter, provides the opportunity to generate electricity, during the day, which can be sold to your utility company. After the Sun has set, simply purchase that same electricity back from them. This will save you the cost and maintenance of using batteries.

Maintaining Your New Solar Panels – A well-built solar power panels system can last for decades. Because photovoltaic cells have no moving parts, maintenance is typically not required once the units have been installed. You may be required to simply wash the panels every few years to remove any grime that might have accumulated.

With the continuous rising cost of conventional supplied electricity, it makes sense to find creative ways of generating your own energy through free renewable resources. Even do-it-yourself beginners with little or no construction experience can fabricate their own solar panels and install them on the roof, or any nearby location with direct sunlight through most of the day. Other alternative energy sources to consider include manufacturing your own simple energy producing windmill or solar water heater. All the information, instructions and guidelines you need can be found online searching for DIY solar power info.



Source by Timothy Lancester

X