No products in the cart.

Sale!

Flowline LU83-5101 EchoSpan Ultrasonic Level Transmitter with 26.2′ Cable, 2″ NPT

Configuration is simple via integral push button display module
LCD display indicates level in inches, centimeters and percentages
Narrow 2″ or 3″ beam width for applications with limited measurement space

(As Of January 20, 2018, 6:29 am)
(0 customer reviews)

$895.00 (as of January 20, 2018, 6:36 am) (as of January 20, 2018, 6:36 am) $716.00

Buy product

Description

The general purpose ultrasonic level transmitter provides continuous level measurement up to 32.8′ with a 4-20 milliampere signal output, and is configured via its integral push button display module. This non-contact liquid level sensor is ideally suited for corrosive, ultrapure, sticky or dirty liquids, and is broadly selected for bulk storage, day tank, lift station and process tank level applications. Automatic temperature compensation for accurate measurement. Configuration is fast and simple with the scrolling single layer menu, 3-button interface and 6-segment LCD display. Troubleshooting is easy with our powerful setup and diagnostic modes. Setup displays the transmitter’s calibration set points and diagnostics provides users with a snapshot of the installed sensor performance in the application. Range: 8″ to 26.2′. Accuracy: +/- 0.2 percent of range. Resolution: 0.039″. Dead band: 8″. Beam width: 3″. Configuration: push button. Memory: non-volatile. Display type: LCD, 6-digit. Display units: Inch, cm and percent. Supply voltage: 12-28 VDC. Loop resistance: 500 Ohms at 24 VDC. Signal output: 4-20 milliampere, two-wire. Signal invert: 4-20, 20-4 milliampere. Signal fail-safe: 4, 20, 21, 22 milliampere or hold last. Process temprature: -7 to 140 degreeF. Temprature compensation: automatic. Ambient temprature: -40 to 160 degreeF. Pressure: MWP equal to 30 psi. Enclosure rating: NEMA 4X (IP65). Enclosure material: polycarbonate. Enclosure hardware: brass and stainless. Enclosure vent: water tight membrane. Conduit entrance: dual, 1/2″ NPT. Transducer material: PVDF. Process mount: 2″ NPT. Mount gasket: Viton. Classification: general purpose. Compliance: CE, RoHS.
Configuration is simple via integral push button display module
LCD display indicates level in inches, centimeters and percentages
Narrow 2″ or 3″ beam width for applications with limited measurement space
Fail-safe intelligence and diagnostic feedback for simple troubleshooting
PVDF transducer and NEMA 4X polycarbonate enclosure for corrosive liquids

Additional information

Binding

Brand

ItemDimensions

Label

Manufacturer

Model

MPN

NumberOfItems

PackageQuantity

PartNumber

ProductGroup

Publisher

Studio

Reviews

There are no reviews yet.

Add a review

Your email address will not be published. Required fields are marked *

X