No products in the cart.

Equifax Hack Put More Info at Risk Than Consumers Knew

Posted on February 9, 2018 By In industrial engineering , industrial production , industrial production and capacity utilization , industrial technology With no comments


  1. Equifax Hack Put More Info at Risk Than Consumers Knew  U.S. News & World Report
  2. The Equifax hack could be worse than we thought  CNNMoney
  3. Shares of Equifax dive because data breach was reportedly worse than everyone thought  CNBC
  4. Full coverage



Source link

Learn How to Make a Windmill For Energy

Posted on February 9, 2018 By In Uncategorized With no comments

Ready to turn the lights on in your home with your own wind generated electricity? With the high expense of buying a windmill, it may seem a little out of reach. By learning how to make a windmill, you could have multiple windmills up, with wind turbines spinning, producing electricity for less than the cost of buying one windmill.

Probably the easiest way to discover how to make windmill is by locating someone who has done it. If you know someone in your community who has built their own electric generating windmills, you could ask them to teach you the ropes. They will probably be very happy someone wanted to share in their excitation for using renewable energy. It is almost always easiest to learn when someone can show you step by step how they did it.

Not only can they show you how to make a windmill, but they will guide you on where to get the parts, and how much you should expect to spend. Not needing to do all of the research and learning on your own will save you a lot of heartache and frustrations. The challenge is that in most communities, it is very difficult to find someone who has embarked on the path of green energy using windmills. If you discover no one in your area is already an expert, then maybe you should become the community expert.

When you can not find someone locally to guide you, the next best option is to find someone online with the expertise. You will discover there are a few people who have taken their adventure of learning how to make a windmill, and put it all together into guides. At least one of them has even gone to the trouble of creating videos of the process to give you a more complete picture of how the entire process is done.

Since you do not have the advice of a local expert, you need to make sure the plans you use includes a list of where to get all of your parts for good prices. It would be extremely frustrating to have all the information, but to not have a clue where to find the parts. Do not neglect the important aspect of what batteries you are going to need. The batteries can be one of the more expensive components. An expert on how to make a windmill will know exactly where to get the batteries at the lowest cost.

Once you have learned how to make a windmill, you will be the local expert on producing electricity at home. Even if you do not feel like an expert, having the clearly outlined plans, diagrams, and parts lists will make you appear to be the expert to all of your friends.

Producing your own electricity, reducing your electric bills, and becoming the local expert all starts with learning how to make a windmill the first time. You'll be pleasantly surprised at how easy the process actually can be.



Source by Larry T Peterson

Equifax hack put more info at risk than consumers knew

Posted on February 9, 2018 By In industrial engineering , industrial production , industrial production and capacity utilization , industrial technology With no comments


  1. Equifax hack put more info at risk than consumers knew  Chicago Tribune
  2. The Equifax hack could be worse than we thought  CNNMoney
  3. Shares of Equifax dive because data breach was reportedly worse than everyone thought  CNBC
  4. Full coverage



Source link

Electronic Control Unit – A Look at Different Types Used in Motor Vehicles

Posted on February 9, 2018 By In Uncategorized With no comments

An electronic control unit or ECU is usually linked to motor vehicles thus making it popular in automotive electronics. Some may often term it plainly as a control unit or other names such as control module. Generally, an ECU means a system of controls in order to test and analyze the electrical systems found in motor vehicles.

A unit is more of a general than a specific term. This simply means that it has other categories under its banner. With modern car owners, it is best to know the most common types of ECUs used by the automotive industry to make each motor vehicle serve its real purpose. The list includes engine control units, transmission control units and airbagl units.

Engine Applications

Sometimes, an engine control unit is also abbreviated as ECU. Specifically, this part of modern cars is used in order to control engines through employing techniques that will determine the amount of fuel that the motor vehicle has. It is also essential in controlling the timing and ignition of these engines through the use of sensors and basic reading values. Other functions of the engine include controls for idle speed and variable valve timings. Most modern cars already have programmable types and are highly significant when car owners want to modify the vehicle’s old engine.

Transmission Applications

This is another unit for motor vehicles that are critical in controlling automatic transmissions of modern electronics. It makes use of sensors of the vehicle and its corresponding engine control unit. The transmission control unit calculates when or how a person should change gears. This is important to make the shift quality better and to provide increased fuel economy. Both of these things are vital for the automobile to reach its optimum performance. Transmissions have changed from hydromechanical controls to a more updated version that has such controls. One of the most important changes in this type of ECU is the transmission solenoid.

Airbag Applications

Simply known as an airbag, this part of electronic cars is known as one of the passive safety devices. These are known as inactive counterparts of seatbelts. When used by vehicle owners, the airbag control unit becomes an active part of the vehicle as well.

Other types

Aside from the three main types of ECUs, there are others one must take note of. The list includes the telephone control unit, man machine interface, door and seat control units and the speed control unit. The enumeration for any vehicle will not be complete without the body control module which is essential in controlling door locks, windows and courtesy lights.



Source by Richard C. Milton

Oil skids to biggest weekly loss in two years amid market turmoil

Posted on February 9, 2018 By In industrial engineering , industrial production , industrial production and capacity utilization , industrial technology With no comments


  1. Oil skids to biggest weekly loss in two years amid market turmoil  Reuters
  2. Oil prices fall below $60 a barrel for the first time this year  CNNMoney
  3. 2018 Brent crude oil volatility: February outlook  Platts
  4. Oil Prices Fall Below $60 On Renewed Shale Threat  OilPrice.com
  5. Full coverage



Source link

Air Conditioning Units – Preventive Maintenance in 3 Steps

Posted on February 9, 2018 By In Uncategorized With no comments

Regular maintenance is important for the life of your air conditioning units. Preventive maintenance of units is far easier than correcting problems down the road. As, it is said, prevention is better than cure. On an average, normal life of a residential air conditioning system is around eleven to fourteen years. If maintained properly, these systems can run even more without any need to repair.

If your residential air conditioning system both cools and heats your home, you must maintain it in fall and the spring season each year. If it is only for cooling purpose you must get it checked at least once a year before the season requiring cooling starts.

For your air conditioning units, preventive maintenance can be done in just 3 simple steps to save you from sudden annoying breaks or improper functionality. The following 3 steps can also be referred to as a checklist for carrying out the maintenance work systemally and thoroughly. I suggest using a reliable HVAC contractor to follow through with the 3 steps:

Step # 1: Check the outdoor units

With the help of a technician, you can inspect the complete system for an adequate level of the refrigerant, cleaning the debris from the inside cabinet, clear the drain openings, clean the coil and check the fan blades and the motor for visible sign of wear and tear. You must also check the control box, other related accessories including wire networks and connections. It is advisable to ensure all the electrical units are functioning properly and safely. You should also check the compressor and the attached tubes for any signs of damage.

Step # 2: Inspect the indoor units

Clean the blower wheels and motor, and provide lubrication to the motor if necessary. If any faulty function is observed, replace that part immediately. You must inspect the combust blower for debris and clean it. Checking gas leaks from furnaces is also important to ensure a proper functioning air conditioning unit. If your system also has heating facility, you should also check the ignition system and other safety elements. You should inspect if the flue system is properly attached to the furnace, look for sign of corrosion and for any dislocated element. Then you clean the air filters and inspect the wiring connections. An overall inspection for the system is also important to find out if there is any leakage in the airflow system.

Step # 3: Inspect the system while it is operating

When you switch the system on, look for its starting characteristics and notice if there is any abnormality. You can get a hint from the noise it creates when switched on. You must also look for any unusual odor that comes with switching on the system. You can then measure the temperature and adjust the airflow according to the level desired. You must check the vents or openings in your home for proper airflow. Another important inspection you should make is about the energy load it takes to perform.

With air conditioning units, preventive maintenance is vital to saving yourself from breakdowns at unexpected times, often when you need your system to be operating the most.



Source by Everett Maclachlan

Budget deal includes benefits for Vogtle reactors’ construction

Posted on February 9, 2018 By In industrial engineering , industrial production , industrial production and capacity utilization , industrial technology With no comments


  1. Budget deal includes benefits for Vogtle reactors’ construction  The Augusta Chronicle
  2. Nuclear Power, Carbon Capture Winners in New Budget Deal  POWER magazine
  3. New budget deal to extend tax credits for Georgia Power’s Vogtle  MyAJC
  4. Full coverage



Source link

The Importance of Testing Skid Steer Attachments Before Purchase

Posted on February 9, 2018 By In Uncategorized With no comments

There's no denying the fact that the variety of skid steer attachments is what makes skid steer loaders one of the most efficient compact construction vehicles in the industry. However, without taking necessary preceditions before purchasing an attachment, things can critically fall apart, and what was once thought as a practical implementation can automatically be classified as disastrous.

First and foremost, potential buyers must look for things such as fluid leaks in the hydraulic system of the vehicle. Any present leaks are a dead giveaway that the vehicle and its attachments are not in good condition, and if purchased, might even require more repairs than is practical. Whether brand-new or used, leaks or any potential for them must always be checked, as this can pose a hazard to the operator of the vehicle.

Next is to consider the weight of the skid loader attachments. While larger attachments may look to be more efficient than smaller ones, these will also be heavier. In turn, the attachments will not be able to stand up to maximum use, and may even damage their couplers, rendering the vehicles useless. Before purchasing attachments, make sure to balance their weight with the lifting capacity of the vehicle.

And regarding couplers: When testing an attachment, owners or operators must first raise the loader arms up and look at the pins on the back side of the coupler to make sure that they are engaged with the attachment. Should this fail, there is a big chance that the attachment can fall off, which can be fatal to anyone operating the skid steer loader.

Finally, the reliability of the skid steer attachments will also depend on the reliability of the seller. Before purchasing, make sure to only buy from trusted companies who can offer warranties or money-back guarantees.



Source by Jack M Patterson

Meijer recalls select yogurt products due to potential presence of glass shards

Posted on February 9, 2018 By In industrial engineering , industrial production , industrial production and capacity utilization , industrial technology With no comments


  1. Meijer recalls select yogurt products due to potential presence of glass shards  MLive.com
  2. Meijer Yogurt Recalled After Customer Finds Glass Shards  The Daily Meal
  3. RECALL: Meijer issues recall for glass in yogurt cups  WRTV Indianapolis
  4. FDA: Meijer recalls Greek and low-fat yogurt products after glass found in packages  Cincinnati.com
  5. Full coverage



Source link

Impressive Car Audio Systems Serve As Inspiration to DIY Audio Builders

Posted on February 9, 2018 By In Uncategorized With no comments

When spending so much time in the car, having a great audio system will help make drives more enjoyable. Replacing a car’s audio system can be expensive. However, car owners who want to build their own wholesale car audio systems can take inspiration from some of the best vehicle audio systems in the world.

The SRT Viper has begun to utilize a Harman Kardon sound system with eighteen speakers in their new models. The proof of the system’s incredible sound is evidenced by the fact that music can be heard over the Viper’s engine roar. Harman Kardon speakers are modern, extremely high powered, and earth shattering.

The bass capabilities in the system make it perfect for listening to hip-hop. However, these speaker systems often need a separate subwoofer that takes up space in the foot well or trunk. In cars like a Viper, that kind of space is precious. When building a wholesale audio system, consider how much space and how many products are needed to get the desired quality sound.

While the Harman Kardon speakers are spectacular and designed to get the heart pumping, the amount of speakers needed make it a poor option for smaller cars. The SRT Viper designed their model around the speakers, which makes Harmon Kardon speakers work well with the car design.

The Audi Bang and Olufsen contain a state of the art sound system in their vehicles. Speakers are customized with the latest B&O technologies. They utilize Acoustic Lens Technology and ICEpower technology. The combination creates one of the best acoustic experiences ever created for cars.

Audi’s have nineteen high performance loudspeakers, moving tweeters on the dash, sealed loudspeaker boxes, fully aluminum loudspeaker covers, amplifiers, 1400 Watt of amplification power, advanced vehicle noise compensation, 5.1 surround sound technology, and dedicated sound tuning. This sound system formula can be mimicked with a wholesale speaker system.

One of the qualities that makes Audi’s sound system the best is the seamless integration of the sound system with the clean and elegant interior. The sound system is barely noticeable when entering an Audi, but passengers immediately know they are experiencing quality sound. DIY audio builders should consider a seamless integration with their sound systems.

Maybach cars have always been known for luxury. Recent models are incorporated a Bose audio system in their new vehicles. The Bose audio system has been compared to having the band actually in the backseat of the Maybach, playing a private concert for the driver.

Learning from a Bose sound system can help those building their own car audio systems. The various audio channels are sent to a careful combination of speakers for advanced surround sound. Five audio channels need to be distributed to more than five speakers. This is achieved through precise wiring and circuitry.

People can experience the wide soundstage and ambience of a concert hall with the sense of being on stage in the middle of the performance with a Bose sound system. The Mayback achieves this by navigating the difficult acoustic challenges of the interior of a vehicle.

In home theater systems, surround sound systems are set up by careful placement of speakers set up around a central listening area. This provides the experience of balanced sound. In a car, all the passengers do not get to sit in the middle. Seats are off center and next to speakers which can cause a sound distortion.

When designing a cheaper audio system in private cars, a balanced stereo is vitally important. A surround sound system, like that of the Maybach, becomes a challenge. Left and right balance along with a 360 degree sound field must be considered for each listener in a car. Bose systems achieve a full surround experience no matter where passengers are in the vehicle.



Source by Sharone Yerushalmi

X